Buy Golf Putters Online

The Titleist Scotty Cameron Studio Select Fastback No. 1 was added to the Studio Select production line September 2008 after a Tour-proven winning season as an Xperimental Prototype. It has been redesigned by Scotty to include a double bend shaft-over-spud setup for those seeking a nearly face-balanced putter. The Fastback No. 1 maintains the same headweight as other Studio Select models but has a slightly thicker topline. Features: Double bend shaft-over-spud setup for those seeking a nearly face-balanced putter Milled sight line for alignment Loft: 4° Lie: 71° Offset: Half Shaft Head material: Precision Milled 303 Stainless Steel

The Titleist Scotty Cameron Studio Select Squareback No. 1 was put into production after a season on the PGA Tour as an experimental Prototype. The design has been fine-tuned to include a double bend shaft-over-spud setup for those seeking a nearly face-balanced mallet. This Putter has a half shaft of offset so players can get a clean look at address and a silky smooth feel at impact. It was givin it's name by the signature square flange that Scotty designed. This model contains that same headweight as other Newport models but has a slightly thicker topline. Features: Double bend shaft-over-spud setup for those seeking a nearly face-balanced putter Milled sight line for alignment Loft: 4° Lie: 71° Offset: Half Shaft Head material: Precision Milled 303 Stainless Steel

The Scotty Cameron Studio Select family of precision milled 303 Stainless Steel Newport-style putters features bold red tour graphics, an improved high toe profile, and heel & toe circular sole weights that allow for multiple length options in each model. Features: The circular heel-toe weights provide increased stability by reducing head rotation on off-center impacts for a larger sweet spot The factory adjustable weights are set to provide the proper headweight-to-shaft length combination, but can be customized to make the head feel heavier to suit specific putting green conditions Studio Select also features a stepless shaft for a clean look at address and soft but solid feel Models: Newport - plumbing neck providing a full shaft of offset Newport 1. 5 - flare neck providing a 1/2 shaft of offset Newport 2 - plumbing neck providing a full shaft of offset Newport 2 Mid Slant - Mid Slant neck providing a full shaft of offset

The Scotty Cameron Studio Select Newport 2. 6 with its zero-offset setup incorporates a milled sight dot behind the stepless shaft to give players a reference mark at address—players can use the dot to develop a consistent shaft angle setup and/or stroke. The performance-proven Newport 2 head style gives the 2. 6 its crisp, familiar lines, including the milled sight line in the flange. With its shaft-over-spud-tip assembly positioned one shaft back from center, the Newport 2. 6 maintains the same headweight as other Studio Select Newports with a slightly thicker topline and a quarter toe hang. Features: Newport 2 head style gives the 2. 6 its crisp, familiar lines, including the milled sight line in the flange Zero-offset setup Precision milled 303 stainless steel head Factory interchangeable weight

Axis 1 Putter The Axis 1 putter is a breakthrough innovation that challenge the wisdom of contemporary clubs. By shifting the heel weight forward of the striking face, the club's center of gravity is now placed exactly on the clubs sweet spot and in-line with the axis of the shaft at the same time. Experience the difference of a perfectly balanced club with a true pendulum swing. Features * 304 Stainless steel * Copper insert for maximum soft feel * Steel shaft with stiffness grooves and vibration damping core * Stainless steel counterweight screws allow for final balance calibration during assembly * Top of the line Winn grip offers the ultimate in grip comfort Innovation Try this exercise: 1. Take your putter and address the golf ball 2. Support the lower shaft of the putter with one foot to maintain the angle of the shaft 3. Gently release the pressure of your grip 4. Watch what happens Notice how the clubface of your putter rotates clockwise around the axis of the shaft (right handed clubs). This rotation is due to every putter's center of gravity being located at some distance behind the axis of the shaft. This means the while you putt, not only are you trying to swing your club in a straight line, but you are also overcoming the tendency for your putter to open up and push the ball to the right. This rotating force is made worse by today's most popular putters which continue to increase in depth in order to provide large alignment features. Now, if you were to do the same exercise with the Axis 1 putter, you would see that the club head remains perpendicular to the direction of the putt even after you relax your grip on the club. Axis 1's patented approach makes feel the top priority on our putter. By innovatively adding a counter weight forward of the striking surface, the Axis 1 putter places the center of gravity directly in line with the axis of the shaft and on the sweet spot of the striking surface at the same time. This perfect balance allows us to offer you a club that swings like a true pendulum. Innovation When I first heard about the Axis1 concept, I was expecting to see another gimmick. However, now that I have seen and used the putter, I can honestly say that I like the look, I like the feel, and this putter is not a gimmick, it is based on real physics Chester Shira, former CEO and founder of Carbite Golf. Wow, this is really a different looking putter. I like the feel, this club really feels different; it doesn't twist in your hands the way other putters do." Tom Cunneff, Senior Editor and equipment reviewer for Links Magazine. I have been producing and designing golf equipment for over 30 years and I have to say that it is an honor to meet a real pioneer in golf club design." Endor Wang, Sr. Engineer for NAII, golf club manufacturers. Not only does this club have perfect balance, it also looks like a work of art that should be in a museum. Bruce Black, Director, TopFlight Shortgame School, Denver,CO. I ran out to practice the day after getting it, and hit about 10 putts in freezing weather and immediately put my Odyssey aside in the garage. I was able to switch without any reservation or learning curve. -The balance is so good that if you hit a normal pendulum swing (no wrist action) the ball comes off the putter on the intended path with no sideways spin. If you line up correctly, it is very hard to miss a 4 footer. Steve Sands, Sun Microsystems, Austin, TX.

Yes! C-Groove Putter: Groove Tube Training Putter The Groove Tube. Like a club and putting aid all in one. True 3-D overhead alignment uses an elevated sightline window and a heads up centering line to verify correct setup position. Swing path ghost imaging allows golfer to visually simulate the stroke with practice swings. With its synergistic balance and feel, not to mention of course, our proven C-Groove technology, the Groove Tube imparts an instant sense of confidence and pays it off with greater accuracy. Features * Patented sight alignment system * Face balanced * 385 gram head weight * Loft: 2.5 degrees; Lie: 72 degrees std. * High MOI mallet design for extreme forgiveness * Features a unique double bend shaft * Available in RH and LH models, shaft lengths 32 in. to 37 in. * Custom fitted head cover * Patented sight alignment * C-Groove face technology On any putt, on any green, a putter's impact on the golf ball often results in skidding, sliding, back spinning, and even hopping before the ball can begin rolling on the green. Even when struck on the right line, these effects are the principal causes of missed putts. Therefore, the key to more accurate putting is to achieve forward rolling motion immediately upon striking the ball. The Yes! Golf C-Groove putter does just that, far better than any other putter in the game. Upon impact with the golf ball, the patented concentric edges on the C-Groove putter face grip the surface of the ball and apply physical forces which simultaneously lift the ball out of its resting position and impart an over-the-top rolling action. See how it works What it does Performance Using the Yes! C-Groove putter creates stabilization in the rolling motion dramatically sooner than any other putter. Forward rolling motion is as much as 6 times greater with the use of the Yes! C-Groove putter versus other putters. This result has been proven using a computer controlled putting robot and high-speed cameras. Over a 20 foot putt, the C-Groove putter was tested by an independent testing company against several putter models of the major golf companies. In all cases, the C-Groove putter dramatically outperformed the competition. Whether struck dead center, a millimeter or even a quarter inch off center, the C-Groove putter rolls the ball sooner, for more consistent length and more consistent direction. That translates to more putts made, no matter the circumstance, no matter the pressure. This technology has been proven in thousands of comparison tests performed by professional and amateur golfers at over 100 PGA Tour Events worldwide and at major trade shows in the U.S. and Europe. If you have any questions about this product or would like to order by phone, please call us Toll Free at 888-733-8383. We look forward to hearing from you!

Yes! C-Groove Putter: Abbie The Abbie is designed for the golfer who is looking for a soft responsive feel off the putter face which is one of the benefits of the carbon steel head. Features * Traditional weighted blade putter computer milled from 1045 carbon steel. * 355 gram head weight; Loft: 2.5 degrees; Lie: 72 degrees std. (3° flat or upright available) * Straight shaft with a slant neck hosel features a single sight line in the cavity for alignment. * Available in Right Handed models, shaft lengths 33" to 35" See how it works What it does Performance Using the Yes! C-Groove putter creates stabilization in the rolling motion dramatically sooner than any other putter. Forward rolling motion is as much as 6 times greater with the use of the Yes! C-Groove putter versus other putters. This result has been proven using a computer controlled putting robot and high-speed cameras. Over a 20 foot putt, the C-Groove putter was tested by an independent testing company against several putter models of the major golf companies. In all cases, the C-Groove putter dramatically outperformed the competition. Whether struck dead center, a millimeter or even a quarter inch off center, the C-Groove putter rolls the ball sooner, for more consistent length and more consistent direction. That translates to more putts made, no matter the circumstance, no matter the pressure. This technology has been proven in thousands of comparison tests performed by professional and amateur golfers at over 100 PGA Tour Events worldwide and at major trade shows in the U.S. and Europe. If you have any questions about this product or would like to order by phone, please call us Toll Free at 888-733-8383. We look forward to hearing from you!

Tour Edge Exotics David Glod Tour Proto Putter Includes * These PGA Tour inspired putter designs were created by David Glod, Tour Edge founder and chief designer. Entirely milled in the USA under David's direct supervision they are the epitome of craftsmanship. * Entirely CNC milled from a solid block of SUS303 stainless steel, the most responsive, soft steel available for a milled putter. * The unique, superior design of the X-grip face pattern provides unprecedented feel and control on the green. The responsive, pure feedback of the face design translates to incredible accuracy and touch. * Three TOUR inspired shapes incorporate a high-toe profile, eliminating the tendency to raise toe at address, causing putts to go left. * Design incorporates hand-rolled leading edge and Tour-preferred silver bead finish. * 100% made in the USA finished putter Specs Model Loft Lie Weight Swing Weight Length V1.1 3 deg 71 deg 350 g D2,D7,E2 33"-35" V2.1 3 deg 71 deg 350 g D2,D7,E2 33"-35" V3.1 3 deg 71 deg 350 g D2,D7,E2 33"-35" Models V1.1 V2.1 V3.1

TaylorMade TP Kia Ma Daytona Putter Features * 100% precision-milled from 1020 carbon steel which enables Micro-weighting * New Midnight Black finish for sleek and alluring appearance * Dayton Blade Shape * 345 gram head weight * #1 hosel with Full Shaft offset * Shaft lengths available in RH 33', 34', 35' and LH 35'

TaylorMade TP Kia Ma Monte Carlo Putter Features * 100% precision-milled from 1020 carbon steel which enables Micro-weighting * New Midnight Black finish for sleek and alluring appearance * Classic mallet Monte Carlo * 345 gram head weight * Small post with 1/2 Shaft offset * Shaft lengths available in RH 33", 34", 35"

355 gram head weight, 2.5 degree loft; 72 degrees lie. Forged from a single block. Black Winn grip. Straight steel shaft with offset hosel. Unique yellow head cover. Available in right hand only.

Double bend shaft, face balanced. 2.5 degrees loft; lie 72 degrees std. High MOI Cavity Back design for extreme forgiveness. Anodized grooves. Hybrid head design-aircraft grade aluminum face with 304 Stainless Steel back with Titanium Carbon finish on back and sole. Custom fitted head cover. Available in fight handed with varied lengths of 32'-37' Patented concentric grooves create immediate roll for the most accurate putting in the game.